The Firefly 109 CE Marked Pipe Fire Sleeves provide up to 4 Hours Fire Resistance to various plastic & metal pipe and PVC vent duct penetrations. The Fire Sleeves have been fire tested to EN 1366-3:2009 & BS 476. The European Technical Approval (ETA-12/0332) and EC Certificate 2812-CPR-0341 enables the range to be CE Marked and used throughout the EU. The EN fire testing included pipes and ducts tested with Uncapped/Uncapped (U/U) pipe/duct end configuration as required for ventilated systems.
The Firefly 109 Pipe Fire Sleeves are particularly suitable for use in plasterboard partitions, but can be used in blockwork walls and floors. One length of Fire Sleeve can replace two collars in wall constructions. The Sleeves do not require any additional metal sleeving. The unique intumescent material is vacuum formed to shape which ensures controlled sealing of the plastic pipe or duct.
The Firefly 109 CE Marked Pipe Fire Sleeves provide up to 4 Hours Fire Resistance to various plastic & metal pipe and PVC vent duct penetrations. The Fire Sleeves have been fire tested to EN 1366-3:2009 & BS 476. The European Technical Approval (ETA-12/0332) and EC Certificate 2812-CPR-0341 enables the range to be CE Marked and used throughout the EU. The EN fire testing included pipes and ducts tested with Uncapped/Uncapped (U/U) pipe/duct end configuration as required for ventilated systems.
The Firefly 109 Pipe Fire Sleeves are particularly suitable for use in plasterboard partitions, but can be used in blockwork walls and floors. One length of Fire Sleeve can replace two collars in wall constructions. The Sleeves do not require any additional metal sleeving. The unique intumescent material is vacuum formed to shape which ensures controlled sealing of the plastic pipe or duct.
Pipe Fire Sleeves – Additional Info
- CE Mark Approved
- Up to EI120 Minute Fire Rated in Partitions
- Up to EI240 Minutes Fire Rated in Blockwork
- Specifically tested on PVC Ducting with wall thicknesses of 1.5mm – 2.0mm
- Acoustic, Thermal & Vapour Seal
- Simple & quick to install, no screws or support needed
- No Metal Sleeving required
- Cost effective alternative to Fire Collars
Assessed for installation in:
- Plasterboard clad steel or timber stud partitions
- Masonry Walls & Floors
- Mineral Fibre Batts (BS Only)
Fire Testing Approvals
BS EN 1366-3: 2009 / EN 13501-1
Constructions Covered = Plasterboard Partitions, Solid Walls and Floors
Fire Ratings: Typically EI120 up to EI240 minutes
BS476: Part 20: 1987
Constructions covered – Plasterboard Partition, Mineral Fibre Batts, Solid Walls and Floors
Fire Ratings: Up to 120 minutes – Integrity & Insulation
All reports available upon request
Assessment Reports:
ETA-12/0332 – BM Trada
A03187 Rev F – Chiltern International Fire/BM Trada
Classification Reports:
CR12001A – Chiltern International Fire/BM Trada
CR12001B – Chiltern International Fire/BM Trada
CR12001C – Chiltern International Fire/BM Trada
Test Reports:
IF02045 AR1 – Chiltern International Fire/BM Trada
IF02080 – Chiltern International Fire/BM Trada
IF02087B – Chiltern International Fire/BM Trada
IF03030 – Chiltern International Fire/BM Trada
IF04040a – Chiltern International Fire/BM Trada
IF09045 Rev A – Chiltern International Fire/BM Trada
IF11049 – Chiltern International Fire/BM Trada
IF11059A Rev B – Chiltern International Fire/BM Trada
RF11067 Rev A – Chiltern International Fire/BM Trada
IF11082 Rev A – Chiltern International Fire/BM Trada
To suit pipe sizes 15-169mm (PVC, HDPE, Copper, Steel)
Fire Testing Approvals
CE Approved / European Technical Approval ETA-12/0332 Updated 11.02.20
Certificate of Constancy of Performance – 2812-CPR-0341 Updated 11.02.20
Declaration of Performance – Document No. QA027 Updated 11.02.20
CE Approved / European Technical Approval ETA-12/0332
Certificate of Constancy of Performance – 1224-CPR-0341
Declaration of Performance – Document No. QA027
HELP – DOWNLOADING FILES
Please note that some web browsers may open Revit files in a new tab instead of downloading them. You can change this behaviour in your browser preference settings or by following these steps.
1. Right click on the download button or link.
2. Choose “save link as”.
BIM FILE DISCLAIMER
Although the integrity of these files is checked on creation, TENMAT accept no responsibility for any loss or damage, whether direct or consequential, caused by files which may turn out to be corrupt. Consequently it is the sole responsibility of the person downloading the file to ensure they have the appropriate IT protection measures in place.
Pipe Fire Sleeves
Additional Info
- CE Mark Approved
- Up to EI120 Minute Fire Rated in Partitions
- Up to EI240 Minutes Fire Rated in Blockwork
- Specifically tested on PVC Ducting with wall thicknesses of 1.5mm – 2.0mm
- Acoustic, Thermal & Vapour Seal
- Simple & quick to install, no screws or support needed
- No Metal Sleeving required
- Cost effective alternative to Fire Collars
Assessed for installation in:
- Plasterboard clad steel or timber stud partitions
- Masonry Walls & Floors
- Mineral Fibre Batts (BS Only)
Fire Testing Approvals
BS EN 1366-3: 2009 / EN 13501-1
Constructions Covered = Plasterboard Partitions, Solid Walls and Floors
Fire Ratings: Typically EI120 up to EI240 minutes
BS476: Part 20: 1987
Constructions covered – Plasterboard Partition, Mineral Fibre Batts, Solid Walls and Floors
Fire Ratings: Up to 120 minutes – Integrity & Insulation
All reports available upon request
Assessment Reports:
ETA-12/0332 – BM Trada
A03187 Rev F – Chiltern International Fire/BM Trada
Classification Reports:
CR12001A – Chiltern International Fire/BM Trada
CR12001B – Chiltern International Fire/BM Trada
CR12001C – Chiltern International Fire/BM Trada
Test Reports:
IF02045 AR1 – Chiltern International Fire/BM Trada
IF02080 – Chiltern International Fire/BM Trada
IF02087B – Chiltern International Fire/BM Trada
IF03030 – Chiltern International Fire/BM Trada
IF04040a – Chiltern International Fire/BM Trada
IF09045 Rev A – Chiltern International Fire/BM Trada
IF11049 – Chiltern International Fire/BM Trada
IF11059A Rev B – Chiltern International Fire/BM Trada
RF11067 Rev A – Chiltern International Fire/BM Trada
IF11082 Rev A – Chiltern International Fire/BM Trada
To suit pipe sizes 15-169mm (PVC, HDPE, Copper, Steel)
Fire Testing Approvals
CCE Approved / European Technical Approval ETA-12/0332 Updated 11.02.20
Certificate of Constancy of Performance – 2812-CPR-0341 Updated 11.02.20
Declaration of Performance – Document No. QA027 Updated 11.02.20
CE Approved / European Technical Approval ETA-12/0332
Certificate of Constancy of Performance – 1224-CPR-0341
Declaration of Performance – Document No. QA027
HELP – DOWNLOADING FILES
Please note that some web browsers may open Revit files in a new tab instead of downloading them. You can change this behaviour in your browser preference settings or by following these steps.
1. Right click on the download button or link.
2. Choose “save link as”.
BIM FILE DISCLAIMER
Although the integrity of these files is checked on creation, TENMAT accept no responsibility for any loss or damage, whether direct or consequential, caused by files which may turn out to be corrupt. Consequently it is the sole responsibility of the person downloading the file to ensure they have the appropriate IT protection measures in place.